The 30liter drums, tool boxes and auto parts series consists ofJMX80N Blow molding Machines., which can be used for producing drums, tool boxes and hollow parts of all kinds. Materials of PE, PP, and ABS can be used. Maximum capacity of accumulator head can be 5L while volume of products can be 30L.
Its control system adopts closed loop control imported from Europe and hydraulic system is pressure-flow double proportional control equipped with variable plunger pump to ensure fast and smooth operation of the machine and energy consumption of the hydraulic system can be reduced by 30% or above, saving considerable electricity.
Automatic blow molding machine, hydraulic system, automatic control, high efficiency, low power consumption. Standard process
The Machine Can Produce all kinds of PE Container, such as PE Bottles, PE Barrels, PE Kettles etc.
Setting:
Clamping----------Double station+Hight-precision guide+large arm cylinder axle
Extrusion system--Hard gear surface reducer+Japan inverter
Die system--------Central-incoming extrusion die with special steel
Hydraulic system--Japan hydraulic valve seal and proportional control
Control system----Japan PLC+Imported HMI+PLC automatic
| Parameters |
| Specifications | unit | JMX80series |
| Material | | PP,LDPE,HDPE…. |
| Max container capacity | L | 15--40 |
| Number of die | set | 1 |
| Output(dry Cycle) | pc/hr | 260 |
| Machine Dimension(L×W×H) | M | 4.9x3.8x4.3 |
| Total weigh | ton | 11.5 |
| Clamping Unit | | JMX80series |
| Clamping force | KN | 220 |
| Platen opening stroke | mm | 400--900 |
| Platen size | mm | 1150x900 |
| Max mould size(W×H) | mm | 500x1000 |
| Mould thickness | mm | 420--550 |
| speed of clamping | mm/sec | 260 |
| speed of opening | mm/sec | 260 |
| | | |
| Power | | JMX80series |
| Max drive | KW | 67 |
| Total power | KW | 103.5 |
| Fan power for screw | KW | 1.5 |
| Air pressure | Mpa | 0.8-1.0 |
| Air consumption | m³/min | 1.2 |
| Average energy consumption | KW | 32.5 |
| | | |
| Extruder unit | | JMX80series |
| Screw diameter | mm | 80 |
| Screw L/D ratio | L/D | 24 |
| Plasticising capacity | Kg/hr | 120 |
| Number of heating zone | zone | 4 |
| Extruder heating power | KW | 16 |
| Extruder driving power | KW | 37 |
| Rotate speed of screw | rev /min | 9-87 |
| Drive Form | | transducing speed |
| Speed-down Box | | Alloy steel gear |
| Screw barrel material | | 38CrMoAlA(High quality steel) |
| Screw bolt head | | plating horniness alloy steel |
| heater | | Casting Aluminium heater |
| | | |
| Die | | JMX80series |
| M ax accumulator Volume | L | 4.8 |
| Max feeding speed | kg/sec. | 1.5 |
| Number of heating zone | zone | 3~5 |
| Power of die heating | KW | 16.5 |
| Max die-pin diameter | mm | 250 |
| Diehead distance | mm | 450 |
| (MOOG)Thickness reference point | moog | 30 |
| Diehead structure | | Storing material jar |
| flowing form | | First by first element |
| mainly forming part material | | 38CrMoAlA;42CrMo |
| | | |
| Hydraulic system | | JMX80series |
| Rated pressure1A | Mpa | 16 |
| Rated flux1A | L/min | 17 |
| Rated pressure2A | Mpa | 8 |
| Rated flux2A | L/min | 116 |
| Hydraulic pump drive power | KW | 30 |
| | | |
| Upward-Downward of the pedestal | | JMX80series |
| Upward-downward distance | mm | 390 |
| The speed of Upward-downward | mm/min | 30 |
| | | |
| Servo system | | JMX80series |
| Rated pressure | Mpa | 16 |
| Rated flux | L/min | 16 |
| Hydraulic pump drive power | KW | 4 |
| | | |
| Down blowing device | | JMX80series |
| fluctuating distance( up and down) | mm | 150 |
| Dilate distance | mm | 150--450 |
| Blowing head upward-downward distance | mm | 100 |
| Blowing head upward-downward distance by manual | mm | 150 |
| Max. distance of splint | mm | 210 |
| | | |
| Manipulator | | JMX80series |
| Holding distance | mm | 350 |
| Taking out distance | mm | 1000 |
| | | |
| Power supply | | JMX80series |
| Voltage | V | 380/50HZ |
| Voltage wave range | % | ±5 |
